We always strive to meet the unique needs of each customer
Leave Your Message
BANNER

DELCO VALVE

DELCO Provide Various Optimal Solution For Industrial Valves, Especially For Automatic Control Valves & Manual Industrial Valves etc.

Get a Quick Quote

DELCO Weak Anti Corrosion Direct Acting Plastic Solenoid Valve, AC 24v to 240v

Model: ZCFP

  • Material Body: UPVC/CPVC
  • Direct Acting Type: 0~1.5mWC(Operated from Zero Pressure at 0 Psi)
  • Port Size: 1/2",3/4",1",1-1/4",1-1/2",2",2-1/2 (Thread: 1/2"~2 1/2")
  • Voltage: AC-24V,120V,240V/60Hz,110V,220V/50Hz(DC-12V,24V)
  • UPVC: Concentration of sulfuric acid and hydrochloric acid <10%,fluid temperature <50°C
  • CPVC: Concentration of sulfuric acid and hydrochloric acid <37%,fluid temperature <90°C

Direct-acting solenoid valve is a relatively simple structure, mainly by the solenoid coil, spool, valve body and reset spring and other basic components. Electromagnetic coil energized electromagnetic force directly on the spool, to overcome the spring force and media pressure, drive the spool to move to achieve the valve on and off.
When energized, the electromagnetic force directly suction spool, so that the valve is open, the medium can be passed; after the power failure, the spool reset under the action of spring force and medium pressure, the valve is closed. Can directly rely on electromagnetic force drive, not affected by the media pressure, can be in no pressure or low pressure environment normal work.
Due to the electromagnetic force acting directly on the spool, power instantaneous action can be completed, the response time is short, can quickly realize the fluid on and off control, suitable for the response to the occasions requiring high timeliness.

Weakly Acid Resistant Plastic Direct Acting Solenoid Valves are available with bodies made of UPVC or CPVC, which are low cost and lightweight, and CPVC, which is more temperature and corrosion resistant, and both of which are resistant to weakly acidic media.

Introduction to Anti Corrosion Solenoid Valve

Anti-corrosion solenoid valve for a variety of room temperature, normal pressure, low pressure occasions, applicable to a variety of corrosive media or with particulate media; such as hydrochloric acid, sulfuric acid, a variety of plating solution, various oils, gas, liquefied petroleum gas, aromatic solvents, aliphatic solvents and other pipeline automatic control; widely used in agricultural machinery, pharmaceutical equipment, biological pharmaceutical, chemical industry, wastewater treatment equipment, canned equipment, such as pipeline media Automation control and other fields.

Weak Anti Corrosion Plastic Solenoid Valve Parameter

Characteristic The use of isolated piston structure greatly increases the service life
Medium Acid, alkali, salt and other anticorrosive fluids
Temperature

CPVC: concentration of sulfuric acid and hydrochloric acid <37%, fluid temperature <90℃

UPVC: concentration of sulfuric acid and hydrochloric acid <10%, fluid temperature <50℃

Pressure Pilot Operated Type: 0.01 - 0.6MPa (Require Minimum Start Pressure)
Direct Acting Type: 0 - 1.5mWC (Operated from Zero Pressure at 0 Psi)
Port Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
Port Thread Thread: 1/2" - 2 1/2"
Orifice(mm) 15, 20, 25, 32, 40, 50
Voltage DC-12V,24V
AC-24V,120V,240V/60Hz,110V,220V/50Hz
Tolerance ±10%
Material Body UPVC/CPVC
Seal FKM, EPDM
Armature Tube Stainless Steel 304
Plunger Stainless Steel 430F
Stop SS 430F
Springs SS 304
Shading Rings Copper

ZCFP-anti-crossiona-solenoid-valve-structural-sketch

Size mm Port Thread Cv Temperature Pressure Voltage Boundary Dimension (mm) D Flange Center Hole Spacing
            L H W C A K  
15 G1/2" 4.2 UPVC
ABS:≤50℃
CPVC
≤95℃
0.6MPa AC220V
AC110V
AC24V
DC24V
DC12V
74 132 63.5 63.5 16 92 Φ64
Flange 1/2" 108
20 G3/4" 5.8 80 137 63.5 63.5 19 92 Φ75
Flange 3/4" 125
25 G1" 10 100 147 74 74 26 92 Φ85
Flange 1" 152
32 G1-1/4" 15.2 120 194 94 94 30 94 Φ100
Flange 1-1/4" 183
40 G1-1/2" 21 130 200 94 94 32.5 94 Φ110
Flange 1-1/2" 201
50 G2" 40 172 225 155 155 42 94 Φ125
Flange 2" 264
65 G2-1/2" 52.6 190 - - - 50 - Φ145
Flange 2-1/2" 290
pic_25-4

Become an Authorized Distributor & Boost Your Profits

Grow with DELCO VALVE! Advanced Production, Strict QC – Delivering Valves You Can Trust

GETA QUOTE NOW

Different Types Of Anti corrosion solenoid valves

Different Types Of solenoid Valves

Offering Industry-Oriented Valve Solution For You

DELCO VALVE CO., LTD not only controls the quality in real time, but also zero tolerance for problems is the pursuit of high quality. Workers must undergo rigorous training and strict assessment before they can take up their jobs.
plastic-anti-corrosion-solenoid-valve-warehouse
  • pic_20-4

    Industry-Specific Expertise

    We deliver tailored valve solutions for diverse sectors, meeting their unique operational and regulatory needs.
  • pic_21-5

    Engineered for Performance

    Our valves are built for durability, precision, and efficiency, optimizing your system's performance and longevity.
  • pic_22-5

    Guaranteed Compliance & Safety

    We ensure high standards and certifications, providing reliable and safe solutions that protect your assets and personnel.
  • pic_23-5

    Expert Support & Customization

    Benefit from our technical expertise and customization options, ensuring perfect valve integration and optimal functionality for your specific application.

Authoritatively Certified

We have been certified by IS09001:2015, CE, SGS, ROHS, TUV, FDA and gained more than 30 patents prove our professionalism in valve filed.
iso9001(1)

ISO 9001

CE

CE

rohs

ROHS

FDA

FDA

CNAS

CNAS

0102030405
CE证书_00
FDA阀门测试报告
ROHS证书_00
ISO9001认证 (1)
01020304

CONTACT DELCO VALVE NOW! GET YOUR CUSTOM VALVE SOLUTION

Get Instant Quote